Test

AIR VALVE SPRING COMPRESSOR SET / 25 PCS

ES.BS-1110-5

• Compressed air valve spring compressor valve spring valve stem seal tool.
• Change valve stem seal without dismantling the cylinder head.
• The tool set includes all the tools needed for dismantling the shaft seals, valve springs and valve wedges.
• Special tool for assembly and disassembly of valve spring.

AIR VALVE SPRING COMPRESSOR SET /28 PCS

ES.BS-1111-5

• For assembly and disassembly of valve springs and replacement of valve stem seals on cars, without removing the cylinder head .
• Valves are closed by pressurized air, and can not fall down into the combustion chamber
• Suitable for BMW, Ford, Mercedes, Mitsubishi, Toyota and VAG vehicles. Especially suitable on Benz V6 Engine and BMW V8 Engine.
• Can be applied on European, American and Japanese Cars.
• Works great in narrow space conditions.

UNIVERSAL RADIATOR PRESSURE TESTER KIT (18PCS)

ES.BC-1139-5

• Applications: Chrysler, Ford, GM, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Lexus, Handa, Audi, BNW, Mercedes Benz,Jeep, SAAB, Volvo, VW,Note: Does not fit all years of all models of all models of vehicles listed.
• For use in testing radiators.
• For use in testing radiator caps.
• Confirms radiator leaks.
• Confirms cooling system leaks.
• Test radiator caps for proper operation.

RADIATOR PRESSURE TESTER & VACUUM-TYPE COOLING SYSTEM (28PCS)

ES.BC-1140-5

• For pressurizing out and filing oooling systems.
• Faclitates the detection of leaks and allows for light,bubble-freefling,also of difficult-to fill cooling systems.
• 1pressure pump.
• 1 themometer.
• 1 filing unit with vacuum gauge.
• 2 filling hoses.
• 2radiator oover adaptors,for checking radiator cap for leaks and opening pressure.
• 3radiator adpaters,for printing &filling,suitable for many vehicles with radiator covers.
• 15adapters for expansion tank,for pressurizing out &filing,suitable for almost all vehicles with expansion tanks.
• 1 ring spanner for tightening/loosening the adapters.

PNEUMATIC VACUUM BRAKE & CLUTCH BLEEDER KIT WITH REPLENISHMENT SYSTEM /2 PCS  

ES.BC-1142-5 

• For replacing brake fluid and for bleeding brake and clutch systems
• For fast and efficient work due to simple, one-person operation
• Container capacity: 1
• Hose connection: 6.3 mm (1/4") quick coupler
• Bleeding unit with pistol grip
• 4 adaptors for expansion tank
• 1 compressed air connection nipple
• 2 bleeding adaptors
• 1 hose (transparent)
• 1 refill bottle to be placed on the expansion tank, facilitates the bleeding process
• Working pressure: 6 - 12 bar

2L VACUUM BRAKE FLUID BLEEDER SET / 2 PCS

ES.BC-1143-5 

• A lightweight, easy to carry pneumatic brake bleeder with automatic cut off.
• Air operated (pneumatic - non spark) 2 litre capacity.
• By using vacuum via the bleed nipples there is no requirement for expensive multiple pressure caps. The manual trigger has a locking mechanism to allow hands free use.
• Automatic cut off.
• Working pressure: 40 - 170psi (2.8 - 12 bar).
• Includes automatic (hands free) reservoir top up bottle. 1m silicon hose with universal rubber adaptor.

3L VACUUM BRAKE FLUID BLEEDER SET / 2 PCS

ES.BC-1144-5

• A lightweight, easy to carry pneumatic brake bleeder with automatic cut off.
• Air operated (pneumatic - non spark) 3 litre capacity.
• By using vacuum via the bleed nipples there is no requirement for expensive multiple pressure caps. The manual trigger has a locking mechanism to allow hands free use.
• Automatic cut off.
• Working pressure: 40 - 170psi (2.8 - 12 bar).
• Includes automatic (hands free) reservoir top up bottle. 1m silicon hose with universal rubber adaptor.

2L BRAKE & CLUTCH BLEEDING SYSTEM / 2 PCS

ES.BC-1145-5

• One-man brake and clutch bleeding the professional way.
• Bleeding requires no external power source - simply fill and pump.
• Reservoir holds 2ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry.
• Pressure range makes unit suitable for use with ABS systems.
• Fitted with 42mm（Dia.）straight connector .
• w/1pc,1L Old fluid receive bleeding bottle.
• w/1pc, quick disconnect handle.

3L BRAKE & CLUTCH BLEEDING SYSTEM / 2 PCS

ES.BC-1146-5

• One-man brake and clutch bleeding the professional way.
• Bleeding requires no external power source - simply fill and pump.
• Reservoir holds 3ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry.
• Pressure range makes unit suitable for use with ABS systems.
• Fitted with 42mm（Dia.）straight connector .
• w/1pc,1L Old fluid receive bleeding bottle

4L BRAKE & CLUTCH BLEEDING SYSTEM / 2 PCS

ES.BC-1147-5

• One-man brake and clutch bleeding the professional way.
• Bleeding requires no external power source - simply fill and pump.
• Reservoir holds 3ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry.
• Pressure range makes unit suitable for use with ABS systems.
• Fitted with 42mm（Dia.）straight connector .
• w/1pc,1L Old fluid receive bleeding bottle.
• w/1pc, quick disconnect handle

3L BRAKE & CLUTCH BLEEDING SYSTEM / 2 PCS

ES.BC-1148-5

• One-man brake and clutch bleeding the professional way.
• Bleeding requires no external power source - simply fill and pump.
• Reservoir holds 3ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry.
• Pressure range makes unit suitable for use with ABS systems.
• Fitted with 42mm（Dia.）straight connector .
• w/1pc,1L Old fluid receive bleeding bottle.
• w/1pc, quick disconnect handle

BRAKE FLUID TESTER

ES.BC-1149-5

• High accuracy and reliability
• Test results are displayed on 4 LEDs
• With protective cap to protect the sensors
• Works on a 1.5 V AAA battery (included)
• Easy to use, switch on, insert sensors into the brake fluid, read result
• Suitable for brake fluids DOT3, DOT4, DOT5.1
• Not suitable for brake fluid DOT5
• Diameter: approx. 20 mm
• Length: 150 mm

R134A HIGH QUALITY COMMON COOL GAS METER (60", ADJUSTABLE)

ES.HS-1250-5

• Inclosed the 1107 adjustable coupler.
• R-134a sight glass manifold with three
• 60"color-coded hoses.
• High pressure:0~500psi
• Low pressure:0~120psi
• vacuum:0-30 inHg

DIESEL INJECTOR FLOW TEST KIT FOR COMMON RAIL

ES.HS-1251-5

• Designed to measure return fuel flow on diesel vehicles up to 8 cylinders fitted with common rail injection system.
• Identifies,worn,blocked or inoperative injectors quickly and easily.
• Supplied with measurement tubes for short term tests and measurement bottles for long term,more accurate evaluation.

24PC INJECTOR ADAPTER SET

ES.HS-1252-5

• Used in conjunction with Model No.HS-A2046 and other similar kits,to measure the fuel flow on diesel vehicles.
• Suitable for use with Delphi&Denso fuel injectors.

DIESEL INJECTION LEAK BACK MASTER KIT - BOSCH/DELPHI/DENSO

ES.HS-1253-5

• Designed to measure return fuel flow on
  diesel Vehicles up to 6 cylinders fited with common rall injection system.
• Identifies wom,blocked or inoperative
  injectors quickly and easily.
• Contains measurement tubes for short term
  tests and measurement bottles for long term,more accurate evaluation.
• Master kit includes range of adaptors to suit
  Bosch,Delphi &Denso injectors for comprehensive coverage of common rail diesel vehicles.
• 6 plastic connectors, 6 graduated measuring glass tubes, 6 measuring cups, 18 copper connectors, 6 plastic connectors

FLOW METER AND ADAPTER SET FOR COMMON RAIL DIESELS

ES.HS-1254-5 

• Designed to measure return fuel flow on
  diesel Vehicles up to 6 cylinders fited with common rall injection system.
• Identifies wom,blocked or inoperative
  injectors quickly and easily.
• Contains measurement tubes for short term
  tests and measurement bottles for long term,more accurate evaluation.
• Master kit includes range of adaptors to suit
  Bosch,Delphi &Denso injectors for comprehensive coverage of common rail diesel vehicles.
• 6 plastic connectors, 6 graduated measuring glass tubes, 6 measuring cups, 18 copper connectors, 6 plastic connectors, 6 urea tubes

DIESEL INJECTION LEAK BACK MASTER KIT - BOSCH / DELPHI / DENSO

ES.HS-1255-5

• Designed to measure return fuel flow on
  diesel Vehicles up to 6 cylinders fitted with common rail injection system.
• Identifes wom,blocked or inoperative
  injectors quickly and easily.
• Contains measurement tubes for short term
  tests and measurement bottles for long term,more accurate evaluation.
• Master kit includes range of adaptors to suit
  Bosch,Delphi&Denso injectors for comprehensive coverage of common rail diesel vehicles.
• 8 plastic connectors, 8 graduated measuring glass tubes, 8 measuring cups, 24 copper connectors, 8 plastic connectors

G324 UNIQUE COMPRESSION TESTER KIT

ES.HS-1257-5

• Compression pressure tester set for petrol
  engines Thanks to its adapter,it is suitable for many petrol engines.
• Soope of delivery:
• 1xpressure gauge from0-300 psi,diameter 70mm
• 1xhose,length approx.320 mm
• 1xadapter M14×1.25(on the hose)
• 1xadapter M18×1.5
• 1xpressure pipe with rubber attachment(straight)150mm

TU-20-1 QUICK CYLINDER PRESSURE METER

ES.HS-1258-5

• Suitable for almost all petrol engines.Holds the measured maximum until the pressure release button is pressed.
• 1xpressure gauge from 0-20 bar/0-300psi;
• 1xhose,length approx.230 mm;
• 1xadapter M18*1.5(fixed to the hose,with
• M14*1.25gradation to use the above adapter);
• 1xpressure pipe with rubber attachment(straigh);
• 1xpressure pipe with rubber attachment(angled);
• 1xextension pipe for pressure pipes(approx.106mm),with screw M10*1.0.

TU-12 ENGINE OIL PRESSURE METER

ES.HS-1259-5

• Oil pressure tester set for petrol and diesel engines.
• Scope of delivery:
• 1xoil pressure manometer from0-7 bar or 0-100psi(approx.56mm diameter visible)
• 1xflexible hose,length approx.600 mm,1/8"-27 NPT external thread
• 1xadapter 1/4"NPT(approx.12mm)
• 1xadapter 3/8"NPT(approx.16 mm)
• Suitable for many common vehicles:e.g.Chryser,Ford,GM,Jeep,Acura,
  Audi,BMW,Daihatsu,Honda,Hyundai,Infinity,Isuzu,Jaguar,Lexus,Mazda,
  Mercedes,Merkur,Mitsubishi,Nissan,Porsche,Saab,Subaru,Sterling,Suzuki,Toyota,VW and Volvo

TU-113 OIL COMBUSTION SPRAYING PRESSURE METER

ES.HS-1260-5

• Gauge reads 0-100psi,0-7bar.
• Fits most systems(except for bosch,cis-
  jetronic and gm throttle body systems).

TU-15A CYLINDER PRESSURE METER FOR DIESEL TRUCK

ES.HS-1261-5

• Compression pressre tester set for diesel engnes
  -Universally applicable thanks to many adapters
  -Suitable for direct and indrect injection diesel engines
   easy to use
  -Quick couplings for fast,safe work
  -Integrated reset for repeated measurements without dismantling
  -Flexible 35.5cm hose,also for inaccessible connections
  -70mm manometer with protective sleeve
• -scale:0-70 BAR/0-1000 PSI
  Screw-in adapter/glow plugs
  M10×1.00-approx.68mm long
  M10×1.25-approx.68mm long
  M10×1.25-approx.54mmlong
  M12×1.25-approx.45mm long
• Adapters/injectors
  M18x1.5,M24x1.5,M24x2.0
  Delivery takes place in asturdy plastic case

TU-21 CYLINDER LEAK DETECTOR

ES.HS-1262-5

• To check leakage amount in 4-stroke engines
• To detect engine faults like cylinder head cracks,wom valves or piston rings Display percentage of cylinder leakage &pressure
• Adapters:M12*1.25,M14*1.25.
• Hose adapters and extension with quick couping.
• Twin gauges with air regulafor.

TU-11A AUTOMATIC WAVE-BOX PRESSURE METER

ES.HS-1263-5

• Designed to diagnose problems with oil
  pressure in almost all diesel and petrol engines.
• Dual gauge readings:0-500psi/0-35bar.
• Complete with 1.5m of oil proof hose with 1/8"NPT.

TU-1 VACUUM & FUEL PUMP TESTER

ES.HS-1264-5

• Large3-1/2"diametergauge with
  color-coded easy-reading scales.
• Extra long heavy-duty rubber hose
  and 14mm/18mm manifold adapter.
• Checks for worn of defective parts in
  fuel pumps,vacuum system.

COMPRESSION TESTER KIT

ES.HS-1265-5

• Pressure gauge scale:0-300psi/0-20bar
• Pressure gauge hose:26"long×3/8"
  diameter,500psi working pressure with quick disconnect.
• Hose adapters:Long reach:10-12”Longx
  M12×1.25/500psi working pressure;
  Standard reach:10-1/2"LongxM14x
  1.25/500psi working pressure;
  Standard reach:10-1/2"Long×M10x
  1.00/500psi working pressure.

COMPRESSION TESTER KIT

ES.HS-1266-5

• Quickly and accurately check compression on petrol engines.
• Thread sizes:M18×1.5,M14×1.25,M12×1.25,M10×1.0

TU-15B CYLINDER PRESSURE METER FOR DIESEL

ES.HS-1267-5

• 3-inch professional grade dual scale meter head,
  Reading range chart 0-1000psi (0-70bar);
  Blackening preheating joint: 91mmx M10x1, 119mmx M10x1, 135mm M10x1.25, 118mm x M22x1.5,
  Nozzle connector: 113 mmx M10x1, 102mm x M10x1,83mmx M10x1, 64mmx M10x1.25, 47mm x M12X1.25. 88mx M24X1.5,73mm xM22x1.5, 63mmx M24x2, 75mm x M20x1.5
  Pressure gauge, pipe length: 340mm, threaded joint: 160mm
  Material A3 steel, aluminum, copper, rubber, nickel plating, black phosphorus

TU-114 OIL COMBUSTION SPRAYING PRESSURE METER

ES.HS-1268-5

• 3"gauge with dual scale.reading from
  0-140psi(0-10bar)

HAND-HELD VACUUM PUMP

ES.HS-1269-5

• Attach many kinds of joint to fit most
  kinds of vehicles

• The body has the switch to contro two
  kinds of pressure conditions.

• Contens:Vacuum pump,Fluid

  Container,Transfer cap vacuum hoses;2x580mm,2x80mm,Assorted Vacuum Hose fittings x5,Bleed Nipple Adaptors x3

HAND-HELD VACUUM PUMP

ES.HS-1270-5

• Nylon handle, one manual vacuum pump, one water storage bottle, two water storage bottle caps, two water storage bottle sealing rings, three short hoses, two long hoses, one universal cuff adapter, and 13 connectors

HAND-HELD VACUUM PUMP

ES.HS-1271-5

• Hand-held Vaoum pump.
• Attach many kinds of join to fit most kinds of
  vehicles.
• The body has the switch to control two kinds
  of pressure conditions.
• Include the parts of brake bleeder.
• Pressure range:
  Positive pressure.0-40psi(0-3bar)
  Negative pressure.0-1bar(O--20inHg)

AUTOMOTIVE STETHOSCOPE

ES.HS-1272-5

• With steel tip
• Suitable for detecting faults in engines,bearings and other moving parts.

EXHAUST BACK PRESSURE METER

ES.HS-1273-5

• For testing of the exhaust back pressure.
• To be connected to oxygen sensor thread of
  the exhaust system or to flange of exhaust gas recirculation valve.
• Alows conclusions on blockages or constric-
  tions,such as e.g.clogged catalysts or particulat fiters,thereby preventing expen-sive repair costs due to damage to the
• turbocharger.
• scope of delivery:
  1 flange adaptor for exhaust gas reciroulation
• valve(EGR)
  1 pressure gauge,57mm with two ranges in
• psi &kg/cm²

BASIC EXHAUST BACK PRESSURE METER

ES.HS-1274-5

• Copper joint

PETROL ENGINE COMPRESSION TESTER KIT

ES.HS-1275-5

• For use on engines with deep seated plug ports with difficult access.
• Built-in pressure relief valve enables repeat tests without dismantling.
• Dual scale gauge:0-300psi/0-20bar.
  Flexible hose,approx235mm long with adapter M14*1.25/M18*1.5
• Extension adapters,63mm long:M10*1.0,M12*1.25,M14*1.25,M18*1.5
• Extension adapters,98mm long:M14*1.25.
• Screw repair drivers:M10,M12,M14,M18

TU-112 FUEL INJECTION PRESSURE METER

ES.HS-1276-5

• Comprehensive kit of adaptors and fitings
  for modem Schrader test-port fuel injection systems.
• Components fitted with quick coupling
  system and safety valve to prevent inadvertent discharge of fuel underpressure.
• High pressure,dual scale gauge reading
  0-100psi and 0-7bar with hanging hook and protective bumper.
• Pressure release valve with drain hose for
  safe fuelrecovery.

TU-15C CYLINDER PRESSURE METER FOR DIESEL

ES.HS-1277-5

• Included various adapters(for glowplugs and injector nozzles)make this kit usefulfor many car types.
• Suitable for nearly all brands,such as:BMW,Mercedes-Benz,Ford,VW,Toyota,Tenault,Volvo,Mazda,PSA,Opel,Nissan,Vauxhall.
• Scope of delivery:1 manometer 0-1000psi/0-70 bar,accuracy+/-5%.1 angled adaptor1 H-fitting
• 5glow plug adapters:M10×125,116mm long,M10×1.0,120mm long,M10×1.25,74mm long,M12×1.25,55mm long,M14×1.25,72mm long
• 3 injector adapters:
  M20×1.5,77mm long,M24×2.0,67mm long,21mm,114mm long,1 stanadyn injector adapter:19mm,112mm long,1 ring adapter,1 bag of gaskets/fittings

ENGINE OIL PRESSURE TEST KIT

ES.HS-1278-5

• Test oil pump pressure and also low warning devices.
• Fitted with quick coupling adaptors and 1200mm of hose.Include 9o coupling adaptor for lirmited access applications.
• Adaptors:R1/8 DIN 2999,1/8x27NPT.1/4×18NPT,3/8×1.5,
• M16×1.5,M18x1.5mm,90 Elbow.

ENGINE OIL PRESSURE TEST KIT

ES.HS-1279-5

• Helps to locate faults in the oil pump system.
• Scale measuring 0-10 bar(tolerance+-5%).
• With many adapters;R 1/8"DIN 2999-1/8*×27NPT-1/4"x18 NPT-3/8"x20 UNF-1/2"x20UNF
• M10×1.0-M12x1.5-M14x1.5-M16x1.5-M18x1.5-90°

CYLINDER PRESSURE METER FOR PETROL AND DIESEL (48PCS)

ES.HS-1280-5

• A comprehensive kit for testing the compression on both petrol and diesel vehicles.
• Features 600psi gauge with large rubber bumper,straight and right-angled quick connect fittings,spark /Glow Plug,and Injector Adapters.
• Spark Plug Sizes-10,12,14,18mm.
• Glow Plug Adaptors-Alfa Romeo,BMW,Chrysler,Citroen,Daewoo,Fiat,Ford,Honda,Hyundai,Isuzu,Jeep,Kia,Lada,Lancia,
  Land Rover,LDV,Mazda,Mercedes,Mitsubishi Nissan,Peugeot,Renault,Rover,Saab,Ssangyong,Suzuki,Toyota,VAG,Vauxhall,Volvo,etc.
• Injector Adaptor-M20,M22,M24,and Ford Stanadyne injectors plus clamp-oninjectors.
• This kit will cover most modern cars,vans,trucks,buses.agricultural and marine engines.

FUEL SYNCHRONISATION KIT

ES.HS-1281-5

• For synchronising 2-,3-,4-carburetor systems.Suitable for cars and motorcycles.4 pressure gauges 92.5mm,fitted on the plate.
• 4rubber hoses 8x5x750mm.4 hose clamp replacement gaskets.
• 4 connectors 53mm(M6x0.75).
• 4 connectors 60mm(M6*1.0).4extensions 3.9x102mm.
• 4 extensions 3.9x170mm.
• Negative pressure measuring range:0 to-70cm Hg(O to-30In Hg).Pressure measuring range:0 to 14 PSI(0 to 1 kg/cm²).

HIGH-END QUICK CYLINDER PRESSURE METER

ES.HS-1282-5

• A complete set of testing components for professional technicians Tempered glass pressure resistant lens, special rubber watch cover
• Quick disassembly
• Relaxation valve for quick rechecking
  Multiple flame nozzle connectors (M10, M12, M14, M18,
  200MM extended M14 extension rod
• There are complete maintenance components available
• Cylinder compression ratio Wear out piston rings Compression ratio 0-300psi 0-21kg/cm2

MOTORCYCLE COMPRESSION & FUEL PRESSURE GAUGE SET

ES.HS-1283-5

• Set of three gauges with connectors and adapters for testing compresssion and fuel pressure on motorcycles.
• Gauges range from 0-300psi for compression test,0-7bar/0-100psi for fuel pressure and o-1bar/0-100kpa for low pressure fuel.

MULTIFUNCTION OIL COMBUSTION PRESSURE METER

ES.HS-1284-5

• Comprehensive kit of adaptors and fittings for most fuel injection systems.
• 2-1/2"gauge with dual scale(psi and bar),reading from 0-140psi and 0-10bar.
• Protective bumper specially for gauge Pressure release valve fited with long
• drain hose allows safe recovery of pressure and fuel.

TURBO PRESSURE TESTER

ES.HS-1285-5

• Suitable for all vehicles.

•  

  Pressure:0 to 3Ba

ES.HS-1286-5

• For pressure measurement on brake systems with and without ABS.

• Faclitates troubleshooting of hydraulic brake systems.

• For checking brake pressure control valves, brake force regulators,pre-pressure valves and for determing the pressure difference between left and right/front and rear brakes.

• Scope of delivery:
  2 pressure gauges 0 200 kg/cm²(03000 psi)
  2 adaptor M10×1.5 2 adaptor M10×1.0
  2 adaptor M7×1.0 2 adaptor M8×1.25
  2 adaptor 3/8"×24UNF 2 adaptor 1/4"×28UNF
  2 adaptor 7/16°×24UNF 2 adaptor 7/16"×20UNF
  2 adaptor 5/16"×24UNF 2 adaptor M8×1.0
  2 adaptor M10×1.0 2 adaptor M10×1.25
  2 adaptor M6x1.0 1 connecting pipe
  1 angle connecting piece M14×1.5
  1 connecting pipe M8×1.0
  2 connecting piece 45° 2 connecting piece 90°

POWER STEERING TESTER KIT

ES.HS-1287-5

• 1.For accurate,realiable power steering analysis.
  2.Determines if trouble is in front suspension or steering linkage.
  3.Takes the guesswork out of power steering analysis quickly and accurately by detecting defective power steering pumps and gears and kinked or clogged lines.
  4.Saves valuable time hen rebuilding or replacing parts not actually defective.
  5.The 2-1/4"Ga.has a dual scale dial with ranges from 0-2000psi and 0-140bar.
  6.Includes 13 adapters connection hose,and power steering pressure specifications to test domestic cars and light trucks and some imports.

COOLING SYSTEM VACUUM PURGE & REFILL KIT

ES.HS-1288-5

• Greatly shorten the coolant replacement time, no air will enter, conical shape
  Rubber head is suitable for multiple models of water tanks
  2 coolant hoses, 1 conical rubber head, 1 coolant filler, and 1 connector
  Injection molding process
  Material: Plastic, copper, iron, aluminum, rubber

ENGINE & TRANSMISSION OIL PRESSURE TEST KIT

ES.HS-1289-5

• There are a total of 14 connectors available for adaptation
  The joint material is copper and aluminum

WATER PUMP TESTER

ES.HS-1290-5

• Aluminum material

FUEL PRESSURE TESTING INSTRUMENT

ES.HS-1291-5

• Copper joint

LEAKAGE DETECTION JOINT FOR COLD GAS PIPELINE (ASIAN VERSION)

ES.HS-1298-5

• Leakage Detection Joint for Cold Gas Pipeline(Asian version) copper materials

G324CYLINDER PRESSURE GAUGE

ES.FS-1314-5

• Easy-reading 2-1/2" diameter gauge features colour-coated quadruple calibrations
  0-300 psi,21kg/cm,2000kpa.
  13" durable rubber hose with 14mm/18mm adapter.
  6" heavy-duty stem with universal rubber cone adapter fits all plug holes.

CYLINDER PRESSURE GAUGE

ES.FS-1315-5

• cylinder pressure detection for auto with M12 M18 adapter
  pressure value:（0-300psi，0-2100kpa)
  white extended pole:20cm

TELESCOPIC CYLINDER PRESSURE GAUGE

ES.FS-1316-5

• Works on most domestic and foreign engines;
  12" felxible hose for easy reach;
  fitd 14mm and 18mm spark plug holes;
  0-300psi;
  side release valve

DIGITAL CYLINDER PRESSURE GAUGE

ES.FS-1317-5

• cylinder pressure detection gauge Start and run engine up to normal operating temperature.
  Mark sure the battery is fully charged.
  Removed dust from spark plug wells.Remove all spark plugs.
  Ground hi-tension terminal of the ignition coil avoid spark during test.
  Adaptor: M14 M12

MOTORCYCLE/AUTO CYLINDER PRESSURE GAUGE

ES.FS-1318-5

• Air gauge with quick coupling & release valve.
  High - tension connecting pipe with safety lock coupling.
  Crank shaft type test pipe with rubber plug.
  Transverse axis test pipe with rubber plug.
  Diameter:70mm
  M10*1.0 Adapter
  M12*1.25 Adapter
  M14*1.25 Adapter
  M18*1.5 Adapter

multi-function MOTORCYCLE CYLINDER PRESSURE GAUGE

ES.FS-1319-5

• For motorcycle cylinder oil pressure detection 70mm gauge head. Add rubber protective cover to play a shockproof and anti-drop effect; Measurement range Cylinder pressure (0-300psi , 0-2000kpa) on the left; Oil pressure measurememt on the right (0-100psi 0-7bar)(1bar=100kpa) 3 copper joints M8 M10 M12 Two tee joints Main body aluminum, joint copper

TU-21CYLINDER LEAK DETECTOR

ES.FS-1320-5

• Designed to detect a variety of common engine faults including: worn piston rings, worn valves, cylinder head cracks and blown head gaskets.
  Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure.
  Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs.
  Supplied in carry-case with instructions.
  Reading: Cylinder Leakage %, Cylinder Pressure psi/bar
  Spark plug suitability: 10, 12, 14mm

CYLINDER LEAK DETECTOR &CRANK STOPPER

ES.FS-1321-5

• Kit allows easy identification of compression problems
  detector measures exact leakage amount and locates leaks area
  crank stopper locks engine harmonic balance pulleys and replacing spark plugs

TU-15A DIESEL CYLINDER PRESSURE DETECTION GAUGE

ES.FS-1322-5

• quick connect/disconnect feature allows one gauge to be used with variety of quick adapters for most popular diesel engines
  push pressure scale:0-1000psi 0-70bar
  Application︰
  alfa romeo, audi, benz, bmw, chevette, chrysler, continental,
  deutz, deutz, ford, general motors, hummer, intemational,
  isuzu/isuzu truck, kubota, land rover, lincoln, luv, mark vll,
  mazda, mercedes benz, mitsubishi, navistar, nissan/ud truck,
  opel, peugeot, renault, rover, toyota, vauxhall, volvo, vw.

TU-15B DIESEL CYLINDER PRESSURE DETECTION GAUGE

ES.FS-1323-5

• Comprehensive test kit for both direct and indirect diesel injected cars.
  Simple & easy to use.
  For use on both direct or indirect injection engines.
  Checks engine compression under cranking conditions.
  Small profile, quick coupling adapters for speed & security.
  Built-in pressure relief valve enables repeat tests without dismantling.
  Flexible hose(355MM) gives access to restricted plug & injector ports.
  gauge 0-1000 PSI

DIESEL CYLINDER PRESSURE DETECTION GAUGE

ES.FS-1324-5

• A basic set for Diesel work in the American market.
  Tester has a handy deflate for releasing air & retesting.
  A 16-1/2" wire reinforced hydraulic hose has a quick coupler on a swivel for ease of connection.
  Records pressures from 0-1000 PSI and 0-70 kg/cm2.
  Adapters for GM, Isuzu , Lincoln Mark Vll and Continental,
  Ford/Navistar, Audi, Mercedes, Peugeot, Toyota, VW,
  Volvo-Bacharach conversion adapter also included.
  Comes in a red metal box with insert; instructions and specifications included.

TU-15 DIESEL CYLINDER PRESSURE DETECTION GAUGE

ES.FS-1325-5

• As this set but with the addition of it Clamp-on Injector Adaptor Set.
  Large 2-1/2" ,70kg/cm2 (1000psi) gauge with rubber bumper,
  straight and right angled quick connect fittings and an extensive range of glow
  plug and injector adaptors enable this set to cover the vast majority of car,van,
  truck and bus, agricultural and marine diesel engines.
  Supplied in plastic case with pre formed liner and foam filled Lid.
  Glow plug Adaptor:
  Wide range of Alfa, BMW, Chrysler, Daewoo, Fait, Ford, Hyuidai, Izusu,
  Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault,
  Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo diesel engines.
  
  Injector:
  M20 , M22 , M24 ＆ Ford Stanadyne injector plus clamp-on injector.

DIESEL CYLINDER PRESSURE DETECTION GAUGE

ES.FS-1326-5

• Comprehensive test kit for both direct and indirect diesel injected cars.

• Simple & easy to use.

• For use on both direct or indirect injection engines.

• Checks engine compression under cranking conditions.

• Small profile, quick coupling adapters for speed & security.

• Built-in pressure relief valve enables repeat tests without dismantling.

• Flexible hose(355MM) gives access to restricted plug & injector ports.

• Dual scale 70MM DIA gauge 0-1000psi

VACUUM TESTER & BRAKE BLEEDING KIT

ES.FS-1327-5

• Multifunction diagnostic tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.
  Kit also includes reservoir, hoses and adaptors for bleeding brake and clutch systems on cars, commercials and motorcycles.
  Brass-bodied vacuum pump features large, easy-to-read vacuum gauge calibrated in both inches and millimetres of mercury.
  Supplied in carry-case.
  Contents: Vacuum Pump, Fluid Container, Transfer Cap, Vacuum Hoses; 560mm (x2), 80mm (x4), Assorted Vacuum Hose Fittings (x5), Bleed Nipple Adaptors (x3)

VACUUM TESTER/BRAKE BLEEDING KIT

ES.FS-1328-5

• A multifunction vacuum diagnostic tool with robust compact design.
  Used for diagnosing faults commonly found on vehicle systems including fuel, ignition, transmission and emissions.
  Kit includes reservoir, hoses and adaptors for bleeding brake and clutch systems on cars, commercials and motorcycles.
  Supplied in carry-case.
  Contents: Vacuum Pump, Fluid Container, Transfer Cap, Vacuum Hoses, Assorted Vacuum Hose Fittings (x5)

AUTOMOTIVE VACUUM& PRESSURE TEST KIT

ES.FS-1329-5

• hand held vacuum pump
  attach many kinds of vehicles
  the body has the switch to control two kinds of pressure conditions
  include the parts of brake bleeder
  pressure range:0-60psi(0-4bar)
  nagative range:0--30 inhg(0-1bar)

AUTOMOTIVE VACUUM& PRESSURE TEST KIT

ES.FS-1330-5

• This set includes the vacuum pump,
  complete fittings and accessories for vacuum testing and brake bleeding,
  plus a detailed owners manual.
  The vacuum pump is field repairable.
  Replace worn "o " ring, seals and valves with the vacuum pump repair set.
  Material：nylon

VACUUM PUMP BRAKE BLEEDING KIT

ES.FS-1331-5

• a complete kit for vacuum testing and one-man brake bleeding.
  the kit includes the vacuum pump, complete fittings and accessories for vacuum testing and brake bleeding,
  plus a detailed owners manual.
  the vacuum pump is field repairable.
  replace worn o-ring, seals and valves with the vacuum pump repair kit.
  Main: aluminum die casting
  Positive pressure: 0 ~ 60 psi
  Negative pressure: 0 ~ - 30 MMHG

MULTI-FUNCTION OIL PRESSURE GAUGE

ES.FS-1332-5

• adapters for domestic&foreign cars
  24"flexible hose
  pressure scale:1-100psi/0-700kpa

DELUXE VACUUM FUEL PUMP TESTER SET

ES.FS-1333-5

• Diagnoses valve leaks,incorrect timing,leaky intake manifold & clogged mufflers.
  3-1/2"diameter gauge,includes 3 brass fittings and 4' tubing.
  pressure value：0-28inHGvac 0-70cmHGvac 0-10psi

CARBURETOR SYNCHRONIZE (VACUUM)

ES.FS-1334-5

• For testing fuel pump carburetor and transmission check auto
  with 2~4pcs carburetors
  4pcs 3-1/2" synchronizer gauges with fixed plate
  rubber hose 4pc 8×5×750mm
  extension tube 4pc 3.9×52mm 4pc 3.9×122mm
  cone type connector 8 pc 8×40mm
  4pc 10×53mm(M6×0.75)
  4pc 10×60mm(M6×1.0)
  Package: Blow case

CARBURETOR SYNCHRONIZE (VACUUM)

ES.FS-1335-5

• One of the most comprehensive balancer sets available on the market.
  Features a bank of four mini-gauges with lockable valves enabling user to hold vacuum values in use.
  Supplied with set of long and short carburettor adaptors for easy access amongst the tubes and wires around the carburettor.
  Includes four 900mm delivery tubes.
  Supplied in carry-case.
  Maximum Vacuum: 76cmHg
  Adaptors:
  Long (170mm): M5
  Medium (100mm): M5
  Short (53, 60mm): M5, M6, Push-on Ø6mm

DISCHARGE PRESSURE GAUGE

ES.FS-1336-5

• For exhaust gas detection Meter head with sheath and hook diamter 90mm,measuring range (0-28inHGvac 0-70cmHGvac 0-14psig)

OIL PRESSURE GAUGE

 ES.FS-1337-5

• Meter head diameter 70mm, measuring range (0-150psi, 0-10bar) lron connector specifications: M10 M12 M14 M16 M18 The black connectors are imperial and have the same specifications.

DELUXE BRAKE PRESSURE TEST KIT

ES.FS-1338-5

• Features two 3000psi gauge assemblies .Dual scale dial-standard scale 0-3000psi and metric scale 0-300kg/cm²
  4500psi rated pressure hose assembly.include 22 piece adapter set;high impact blow-molded carring case&refernce chart

TRANSMISSION PRESSURE GAUGE

ES.FS-1339-5

• designed to check engine oil pressure in both cars and trucks easy to read dual scale gauge.
  complete with 24" of oil proof hose with 1/8"npt
  also includes 1/4"npt and 3/8 npt adaptors
  dual gauge reading: 0-400psi 0-28kg/cm²

MULTI-FUNCTION OIL PRESSURE GAUGE

ES.FS-1340-5

• For all major manufacturer domestic and import vehicles.Contains two gauges assemblies for high and low pressure ranges. Nine adaptors to test a wide variety of domestic and import automatic transmissions.Four special fittings are also included for connection to hard-to-reach test ports in
  areas requiring a 45。 or 90。 angle.Acura/Honda, BMW, Chrysler Corp, AMC/Eagle, Jeep, Ford, General Motors, Saturn,
  Hyunda, Infiniti, Lsuzu, Jaguar, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Peufeot,
  Saab, Subaru, Suzuki, Toyota, VW, Volvo.

   

STEERING HYDRAULIC OIL PRESSURE GAUGE

ES.FS-1341-5

• For accurate,reliable power steering analysis Determines if trouble is in front suspension or steering linkage.Saves valuable time when rebuilding or replacing parts not actually defective.Set contains 2000 psi gauge with metering valve.connection hose,13 adapters and power steering pressure specifications.All packed in a plastic storage case.American Motors,Chrvsier Corp,Ford Motor.

TU-113 FUEL INJECTION PRESSURE TEST SET

ES.FS-1342-5

• gauge reads o-100psi 0-7 bar
  fits most system (except for bosch,cis-jetronic and gm throttle body system)

FUEL INJECTION PRESSURE TESTER

ES.FS-1343-5

• The diameter of the meter head is 70mm (0-100psi, 0-7bar) and the extension tube is 300psi

FUEL INJECTION PRESSURE TESTER

ES.FS-1344-5

• The diameter of the meter head is 70mm (0-100psi, 0-7bar) and the extension tube is 300psi

FUEL INJECTION PRESSURE TESTER

ES.FS-1345-5

• Meter head diameter 70mm, measuring range (0-140psi, 0-7bar 1bar=100kpa)

TU-114 OIL COMBUSTION SPRAYING PRESSURE METER

ES.FS-1347-5

• oil combustion spraying pressure meter
  3"gauge with dual scale,reading from 0-150psi(0-10bar)

TU-443 FUEL INJECTION PRESSURE TEST SET

ES.FS-1348-5

• Comprehensive kit of hoses, adaptors and fittings for testing the pressure on modern petrol fuel injection systems.
  Fitted with quick couplings and safety valve to prevent inadvertent discharge of fuel under pressure.
  Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-140psi and 0-10bar.
  Pressure release valve fitted with long drain hose allows safe recovery of fuel.
  Supplied in carry-case.

DOUBLE HEADER FUEL INJECTION FUEL INJECTION PRESSURE TEST SET

ES.FS-1349-5

• A large 3-1/2" gauge with dual readings of 0-150 psi and 0-1000 kpa.
  Also a low pressure 2-1/2" gauge for an accurate reading below 15 psi.
  All adapters, gauges, and hose assemblies feature a quick coupling system
  for speedy and efficient testing connection.
  The uniquely designed relief valve relieves the pressure and the fuel safely.
  Also allows checking for sufficient fuel flow.
  No need for wrenches or pipe dope.
  The specially designed compact, neatly arranged plastic blow- molded box makes
  storage easy.
  Comes complete with instruction manual.The adapter set tests fuel injection systems
  on vehicles on most makes and models:Acura Honda Hyundai Mazda,Suzuki,Toyota,
  Audi,BMW,Mercedes,Peugeot,Porsche,Saab, VW, Volvo W/CIS, CISE or K.jetroni.